Hackintosh Usb

broken image


Hackintosh usb 3

Hackintosher

Administrator
Joined
Jan 21, 2018
macOS
10.15.0
Mobo
Gigabyte Z370N WIFI
CPU
i3-8100
GPU
UHD 630 Graphics

Hello everyone, it's been a while I am not touching the Hackintosh article on this blog. Today, I will start updating the Hackintosh tutorial to the latest version of OpenCore. In this article, I am going to show you how to create the macOS Big Sur 11.0.1 USB Installer for Hackintosh. I hope you enjoy it and let's get started. A vanilla setup implies that the OS itself remains relatively untouched - and that the bulk of the Hackintosh-related kexts, patches, etc are contained on the EFI partition. For all intents and purposes, a vanilla install's main partition is identical to that of an official Apple computer.

As a Hackintosher you should always want to generate your own unique information for your hackintosh so that you're not linked to someone else hackintosh or an existing Mac.
For all these steps you will need to edit your config.plist. When messing around with the SBMIOS settings it's recommended create a backup first before proceeding:
  1. Mount your EFI partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/kexts/Other
  3. Backup your config.plist by making a duplicate copy of it and renaming the backup something else i.e. config-smbios-backup.plist
1. Invalid Serial Number
  1. Right-click config.plist and open with Clover Configurator
  2. Click SMBIOS on left side
  3. Copy the Serial Number
  4. Go to checkcoverage.apple.com
  5. Paste Serial Number and click Continue
  6. If it comes back as valid you will need to generate a new serial number until you get a error or invalid serial number
  7. Go back to Clover Configurator SMBIOS section
  8. Repeat Generate New and paste to checkcoverage.apple.com until you get an Invalid Serial Number

Hackintosh Usb Audio

2. Board Serial Number
Now that you have your own invalid serial number you need to replace the Board Serial Number with one containing your Invalid Serial Number along with 5 random digits. Since they can be any digits I keep the last five digits of the Board Serial Number and replace the first 12 with the Serial Number
  1. Copy Serial Number
  2. Replace the first 12 digits of Board Serial Number with the copied Serial Number
3. smUUID
  1. Open Terminal
  2. Generate a unique string by entering uuidgen into Terminal
  3. Copy & Paste the generated UUID value from Terminal into SmUUID in Clover Configurator -> SMBIOS
  4. Save config.plist
  5. Restart Hackintosh
4. ROM
  1. Select RTVariables in Clover Configurator
  2. Set ROM value to UseMacAddr0
5. MLB
RTVaraibles -> MLB can be left blank once the steps are followed. You can also use one off a valid Mac that you own if you wish, but it is not required or experiment with an MLB generator if you wish, but again following the steps above you shouldn't have any issues with simply leaving MLB blank.
BooterConfig
Usb
  • Set RTVariables -> BooterConfig to 0x28 for Intel for a AMD/Ryzen machine leave it at the value it's already set at.
CsrActiveConfig

Hackintosh Usb

Hackintosh usb wifi

Hackintosh Usb Bootable


  • CsrActiveConfig or SIP should be left in the disabled state i.e. 0x67 for more information see: Enable & Disable System Integrity Protection (SIP) on a Hackintosh

P7zip macos. What's up guys, in this tutorial I'm going to show you How to Create Bootable USB Installer for macOS High Sierra Windows 10 Operating System. There are few applications that you need to download in-order to successfully create a bootable USB Flash Drive to install macOS High Sierra Windows 10 PC.

Firstly, you need to download TransMac application as we will use this to write files onto flash drive. Once you have downloaded and installed TransMac, run the application.
TransMac is a Paid Application. But the trial period will last for 15 days, this is more than enough for us to Create Bootable USB Installer for macOS High Sierra Windows 10.
Before you click Run, just make sure you have plugged-in your 16 GB USB Flash Drive.
Now, Click Run and proceed with the trial of 15 Days. You should see the following screen once you click Run.


Right-Click on your USB Flash Drive and select the option Format Disk for Mac.
When the warning pops-up click Yes.
TransMac will now ask you to name your ISB Drive. I will name my USB Drive as 'USB Installer', but you can name it anything you like. After you Name the USB Drive click OK.
Click Yes
Hackintosh usb not working
, when TransMac will give you the Overwrite warning.

Now, just wait for few moments, as the formatting process is going on.


Once the formatting is successfully completed you should get this following confirmation. If it is not a success, please follow the steps again and format your flash drive.
Hackintosh

Hackintosher

Administrator
Joined
Jan 21, 2018
macOS
10.15.0
Mobo
Gigabyte Z370N WIFI
CPU
i3-8100
GPU
UHD 630 Graphics

Hello everyone, it's been a while I am not touching the Hackintosh article on this blog. Today, I will start updating the Hackintosh tutorial to the latest version of OpenCore. In this article, I am going to show you how to create the macOS Big Sur 11.0.1 USB Installer for Hackintosh. I hope you enjoy it and let's get started. A vanilla setup implies that the OS itself remains relatively untouched - and that the bulk of the Hackintosh-related kexts, patches, etc are contained on the EFI partition. For all intents and purposes, a vanilla install's main partition is identical to that of an official Apple computer.

As a Hackintosher you should always want to generate your own unique information for your hackintosh so that you're not linked to someone else hackintosh or an existing Mac.
For all these steps you will need to edit your config.plist. When messing around with the SBMIOS settings it's recommended create a backup first before proceeding:
  1. Mount your EFI partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/kexts/Other
  3. Backup your config.plist by making a duplicate copy of it and renaming the backup something else i.e. config-smbios-backup.plist
1. Invalid Serial Number
  1. Right-click config.plist and open with Clover Configurator
  2. Click SMBIOS on left side
  3. Copy the Serial Number
  4. Go to checkcoverage.apple.com
  5. Paste Serial Number and click Continue
  6. If it comes back as valid you will need to generate a new serial number until you get a error or invalid serial number
  7. Go back to Clover Configurator SMBIOS section
  8. Repeat Generate New and paste to checkcoverage.apple.com until you get an Invalid Serial Number

Hackintosh Usb Audio

2. Board Serial Number
Now that you have your own invalid serial number you need to replace the Board Serial Number with one containing your Invalid Serial Number along with 5 random digits. Since they can be any digits I keep the last five digits of the Board Serial Number and replace the first 12 with the Serial Number
  1. Copy Serial Number
  2. Replace the first 12 digits of Board Serial Number with the copied Serial Number
3. smUUID
  1. Open Terminal
  2. Generate a unique string by entering uuidgen into Terminal
  3. Copy & Paste the generated UUID value from Terminal into SmUUID in Clover Configurator -> SMBIOS
  4. Save config.plist
  5. Restart Hackintosh
4. ROM
  1. Select RTVariables in Clover Configurator
  2. Set ROM value to UseMacAddr0
5. MLB
RTVaraibles -> MLB can be left blank once the steps are followed. You can also use one off a valid Mac that you own if you wish, but it is not required or experiment with an MLB generator if you wish, but again following the steps above you shouldn't have any issues with simply leaving MLB blank.
BooterConfig
  • Set RTVariables -> BooterConfig to 0x28 for Intel for a AMD/Ryzen machine leave it at the value it's already set at.
CsrActiveConfig

Hackintosh Usb

Hackintosh Usb Bootable


  • CsrActiveConfig or SIP should be left in the disabled state i.e. 0x67 for more information see: Enable & Disable System Integrity Protection (SIP) on a Hackintosh

P7zip macos. What's up guys, in this tutorial I'm going to show you How to Create Bootable USB Installer for macOS High Sierra Windows 10 Operating System. There are few applications that you need to download in-order to successfully create a bootable USB Flash Drive to install macOS High Sierra Windows 10 PC.

Firstly, you need to download TransMac application as we will use this to write files onto flash drive. Once you have downloaded and installed TransMac, run the application.
TransMac is a Paid Application. But the trial period will last for 15 days, this is more than enough for us to Create Bootable USB Installer for macOS High Sierra Windows 10.
Before you click Run, just make sure you have plugged-in your 16 GB USB Flash Drive.
Now, Click Run and proceed with the trial of 15 Days. You should see the following screen once you click Run.


Right-Click on your USB Flash Drive and select the option Format Disk for Mac.
When the warning pops-up click Yes.
TransMac will now ask you to name your ISB Drive. I will name my USB Drive as 'USB Installer', but you can name it anything you like. After you Name the USB Drive click OK.
Click Yes, when TransMac will give you the Overwrite warning.

Now, just wait for few moments, as the formatting process is going on.


Once the formatting is successfully completed you should get this following confirmation. If it is not a success, please follow the steps again and format your flash drive.
Click Ok, and now right-click on your USB Flash Drive again and select the option Restore with Disk Image.

Hackintosh Usb Wifi


Click Yes, when TransMac gives you a warning for Overwriting.Next Step is to Select the dmg file for macOS High Sierra. You would need an Mac to download the macOS High Sierra Installation file from Apple Store.
To locate the DMG File, follow these steps

Hackintosh Usb Dsdt

After you have downloaded the High Sierra app, locate the InstallESD.DMG from the installer.

In Applications folder: Right-click on Install MacOS High Sierra app, then choose Show Packages Contents to reveal Contents folder.

The MacOS High Sierra InstallESD.DMG is found under: Contents/SharedSupport/

Now copy this InstallESD.DMG as you need it in TransMac to Create macOS High Sierra Bootable USB Installer on Windows 10.

Create bootable usb mac disk utility. Ok, so lets continue with TransMac Restore Disk Image to Drive. On this screen, select the InstallESD.DMG file and click OK.
Click Yes, when TransMac Gives you the Overwrite warning.
Now the TransMac will start the process of Restoring High Sierra Image on the Flash Drive. this will take 15-25 minutes, depending on the speed of your flash drive.


Ok that should be it for this tutorial on How to Create macOS High Sierra Bootable USB Installer on Windows 10 PC.https://techhowdy.com/high-sierra-bootable-usb-installer-on-windows-10/https://techhowdy.com/wp-content/uploads/2018/05/Create-macOS-High-Sierra-Bootable-USB-Installer-on-Windows-10-1024x641.jpghttps://techhowdy.com/wp-content/uploads/2018/05/Create-macOS-High-Sierra-Bootable-USB-Installer-on-Windows-10-150x150.jpgHackintosh TutorialsCreate macOS High Sierra Bootable USB Installer,Create macOS High Sierra Bootable USB Installer on Windows,Create macOS High Sierra Bootable USB Installer on Windows 10,High Sierra Bootable USB Installer on Windows 10,macos high sierra bootable usb,macos high sierra bootable usb download,macos high sierra bootable usb from windows,macos high sierra bootable usb installer,macos high sierra bootable usb terminal,macos high sierra bootable usb windowsWhat's up guys, in this tutorial I'm going to show you How to Create Bootable USB Installer for macOS High Sierra Windows 10 Operating System. There are few applications that you need to download in-order to successfully create a bootable USB Flash Drive to install macOS High Sierra Windows..DemonLyoidLopeslyoid_lopes@yahoo.comAdministratorHi there, I am Lyoid Lopes. Internet Marketer and Blog writer. I am Software Engineering Technology graduate from Centennial College Canada. In Techhowdy I publish new technology news every day. You can reach me Facebook, Twitter and Google +TechHowdy



broken image
PreviousNext
Cookie Use
We use cookies to improve browsing experience, security, and data collection. By accepting, you agree to the use of cookies for advertising and analytics. You can change your cookie settings at any time. Learn More
Accept all
Settings
Decline All
Cookie Settings
Necessary Cookies
These cookies enable core functionality such as security, network management, and accessibility. These cookies can’t be switched off.
Analytics Cookies
These cookies help us better understand how visitors interact with our website and help us discover errors.
Preferences Cookies
These cookies allow the website to remember choices you've made to provide enhanced functionality and personalization.
Save